NAIL ANCHOR ENA-K, ZINC PLATED
-
Suspended ceiling structures, pipe suspension, electrical installations, insulation, fittings etc.
-
Nail anchor ENA-K combines the advantage of expander strength and simple nail installation. The nail anchor is easily knocked into a pre-drilled 6 mm hole in concrete. Nail expander ENA-K is equipped with a nail head that is 13 mm.
- Approved for fastening in a redundant* system for a non-structural application in uncracked and cracked concrete.
- Quick and easy installation.
- Shallow drilling depth (35/40 mm) for quick installation.
- Approved for minimal edge distance and mutual spacing.
- Withstands loads up to 2.81 kN.
* Redundant means that several fasteners together carry a load and allow one to fail, but the remaining fasteners must then be able to handle the remaining load
![CE-marking – Products in this group meet the requirements of the Construction Products Regulation (CPR)](/Admin/Public/GetImage.ashx?image=%2FFiles%2FFiles%2FIntegration%2Fc4%2Fsymbols%2F793183.png&width=640&format=webp)
![C1](/Admin/Public/GetImage.ashx?image=%2FFiles%2FFiles%2FIntegration%2Fc4%2Fsymbols%2F793796.png&width=640&format=webp)
![CE-marking – Products in this group meet the requirements of the Construction Products Regulation (CPR)](/Admin/Public/GetImage.ashx?image=%2FFiles%2FFiles%2FIntegration%2Fc4%2Fsymbols%2F794074.png&width=640&format=webp)
Technical Specification
Application environment | Indoors |
Approvals | CE, ETA |
Corrosion resistance class | C1 |
Material to attach | Concrete |
Surface treatment | Zinc plated |
Approval |
---|
ETA-17_0568 |
Declaration of performance |
DoP-170568 (EN) |