GOLDEN ANCHOR, HOT DIP GALVANIZED 45 µM
-
ESSVE Golden Anchor is designed for fastening in concrete and natural stone. Ideally Golden Anchor can be used in applications where high load demands are made on the fixing. Golden Anchor can for example be used when fixing wooden studs/steel joists as we as sills and facade studs, fixing brackets, z-iron, wrought iron designs, etc.
-
Golden Anchor is a stud bolt expander which in its lower section, the anchoring section, has a stainless clip that expands up on the tapered part of the bolt when tightened. The upper section is equipped with an external thread with a flange nut, i.e. a combined nut and washer.
In order to avoid damage to the bolt threads when inserting, the upper section features a impact head. When the drill diameter is equal to the screw diameter contact is created between the hole wall and the clip even when Golden Anchor is knocked into the hole. When the flange nut is tightened the bolt is forced outwards, whereby the clip is forced to expand up on the tapered section.
The hot dip galvanized versions of Golden Anchor is made of carbon steel in strength grade min. 5.8 with stainless clips. The nut is oversized (tolerance 6AZ).
-
See the installation instructions at the end of this section.
Technical Specification
| Application environment | Outdoors |
| Approvals | CE,ETA |
| Corrosion resistance class | C3 |
| Material | 5.8 |
| Material to install in | Concrete,Stone |
| Surface treatment | Hot Dip Galvanized |
| Approval |
|---|
| ETA 12/0257 |
| Certificate |
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| DoP-120257 (EN) |
| Installation instructions |
| Installation instructions (EN) |
| Product Data Sheet |
| Product sheet |
| Product sheet |
| Technical Document |
| Load capacity Golden Anchor |