CONSTRUCTION SCREW – HF (HEX)
-
ESSVE Construction screw-HF (HEX) with two fibre cuts, hexagonal head intended for most installation work in wood, chipboard, plywood, etc.
-
The screw is produced in hardened carbon steel with CorrSeal surface treatment for outdoor environments. The screw is fitted with a cutter one on the point. This means a very low drive-in torque in harder materials and minimises splitting. On screws longer than 60/70/80 mm, there is an additional fibre cut directly after the usual wood thread, this is to facilitate installation of longer and thicker screws. The screw conforms to the CE requirement as per EN14592.
-
Recommended RPM: 400-1200/min.


Technical Specification
Application environment | Outdoors |
Approvals | CE |
Head shape | Hexagon head |
Main Materials | Steel |
Corrosion resistance class | C4 |
Material to install in | Wood |
Surface treatment | CorrSeal |
Certificate |
---|
General Product Safety Regulation (GPSR) |
Declaration of performance |
CS-HF-(HEX)-10.0-CorrSeal (EN) |
CS-HF-(HEX)-6.0-CorrSeal (EN) |
CS-HF-(HEX)-8.0-CorrSeal (EN) |
Technical Document |
CorrSeal coating test report, class C4(15) according to EN 14592:2022 |
Wood screw -HF (HEX) 6.0 - 10.0 mm. CorrSeal-en.pdf |