HDS DECKING SCREW FOR CONCEALED INSTALLATION IN WOODEN JOISTS. STAINLESS STEEL A2
-
ESSVE HDS Decking screw A2 is intended for concealed installation of common pressure-treated decking timber. The screw is installed in the side of the decking board with the help of a specially adapted bit and an installation tool.
-
The screw is made of stainless steel A2. The arrow shaped point minimizes the risk of splintering and reduces the drive-in torque. There is also a thread below the head that creates a high clamping force between the decking board and the supporting joist, the cylindrical head gives a barely visible entry hole. The screw is fitted with TX-bit drive and conforms to the CE requirement set out in EN14592.
-
Decking screw 4.8x60 mm is designed for timber thickness: 25-34 mm and max. width 145 mm, use the installation tool for timber width 110 - 150 mm.
Decking screw 5.0x75 mm is designed for timber thickness: 30-40 mm and max. width 145 mm, use the installation tool for timber width 110-150 mm.
Recommended rpm: approx. 400-1200/min.
Technical Specification
| Application environment | Outdoors |
| Approvals | CE |
| Head shape | Cylindrical head |
| Main Materials | Stainless steel A2 |
| Corrosion resistance class | C4 A2 |
| Material to install in | Wood |
| Number of screws per m² | 35 |
| Recommended rpm | 400-1200 |
| Type of bits | TX15 |
| Certificate |
|---|
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| DoP-Decking-Screw-EN14592 [EN] |