WOOD SCREW COUNTERSUNK HEAD, CORRSEAL
-
ESSVE Wood screw with two fibre cuts intended for most installation work in particle boards, wood, plastic, plug, etc.
-
The screw is produced in hardened carbon steel with CorrSeal surface treatment for outdoor environments. Fitted with TX-drive/bits.
The screw has two fibre cuts. This means a very low drive-in torque in harder materials and minimises splitting.
On screws longer than 160 mm, there is an additional fibre cut directly after the usual wood thread, this is to facilitate installation of longer and thicker screws.
The head is equipped with six cutting grooves that countersink the head, leaving a smooth finish without splinters. The screw conforms to the CE requirement as per EN14592.
-
Recommended rpm: 400-1200/min
Technical Specification
Application environment | Outdoors |
Approvals | CE |
Head shape | Countersunk |
Main Materials | Steel |
Corrosion resistance class | C4 |
Material | SAE1022 |
Material to install in | Wood |
Surface treatment | CorrSeal |
Declaration of performance |
---|
DoP-Wood-Screw-EN14592 [EN] |
Technical Document |
CorrSeal coating test report, class C4(15) according to EN 14592:2022 |