Construction screw – HF (HEX), Corrseal
-
ESSVE Construction screw-HF (HEX) with two fibre cuts, hexagonal head intended for most installation work in wood, chipboard, plywood, etc.
-
The screw is produced in hardened carbon steel with CorrSeal surface treatment for outdoor environments. The screw is fitted with a cutter one on the point. This means a very low drive-in torque in harder materials and minimises splitting. On screws longer than 60/70/80 mm, there is an additional fibre cut directly after the usual wood thread, this is to facilitate installation of longer and thicker screws.
ESSVE Construction screw-HF meets the CE requirements as specified in ETA-23/0747.
-
Recommended RPM: 400-1200/min.
Technical Specification
| Application environment | Outdoors |
| Approvals | CE,ETA |
| Head shape | Hexagon head |
| Main Materials | Steel |
| Corrosion resistance class | C4 |
| Material to install in | Wood |
| Surface treatment | CorrSeal |
Dokument
| Approval |
|---|
| ETA-23/0747 - ESSVE Construction screws ET-T, HF(HEX), W(WAF), ESSDRIVE 6 & 8 [EN] |
| Certificate |
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| DoP-ETA-230747 [EN] |
| Product Data Sheet |
| Product data sheet |
| Technical Document |
| CorrSeal coating test report, class C4(15) according to EN 14592:2022 |
| Wood screw -HF (HEX) 6.0 - 10.0 mm. CorrSeal-en.pdf |