Instruction video ESSVE Wood connector screw
https://www.youtube.com/embed/UDrVKCawxyc?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/UDrVKCawxyc?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
Wood connector screw with fibre cut, Corrseal
-
ESSVE Wood connector screw with fibre cut is intended for outdoor installation in wood fittings against wooden surfaces.
-
ESSVE Wood connector screw is made of hardened carbon steel and has a CorrSeal surface treatment, C4. The screw has a TX-drive/bit. It is equipped with a fibre cut at the tip to reduce drive-in torque in harder wood materials.
-
To install timber connectors with ESSVE Wood connector screw, use a screwdriver with a TX20-bit and maintain a rotation speed between 400-1200/min. Use a torque stop during installation to avoid overtightening or stretching the screw.
Technical Specification
| Application environment | Outdoors |
| Approvals | CE |
| Head shape | Pan head |
| Main Materials | Steel |
| Corrosion resistance class | C4 |
| Material | SAE1018 |
| Material to install in | Wood |
| Surface treatment | CorrSeal |
Dokument
| Certificate |
|---|
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| DoP-Screw-EN14592 [EN] |
| Product Data Sheet |
| Product data sheet |
| Technical Document |
| CorrSeal coating test report, class C4(15) according to EN 14592:2022 |