ESSVE Angle brackets are designed to use when anchoring crossing frameworks and brackets for framing and between wooden posts as well as ground and wall plates.

Made of 2.0 or 2.5 mm stainless acid proof steel, A4. The angle brackets are equipped with 5.0 mm holes and larger bolt holes. The angle brackets are available in two designs, with (m) or without (u) reinforcement.

The angle brackets are installed using e.g. ESSVE Anchor nails 4.0 mm or ESSVE Wood connector screws 5.0 mm. Installation can also be carried out using 8.0 or 10 mm bolts. For cross joint use 4-8 nails/screws in the vertical leg and 4-10 in the horizontal. Minimum 1 nail in each outer corner. Always use 2 brackets per joint.