- ANGLE BRACKET 90X60X60X2,0 REINFORCED 5X30; 10X30 CE
Package information
| Item no. | 452319 |
| Package | PCS |
| PackageType | Sticker label with barcode |
| Content | 1 |
| Ordered in multiples of | 50 |
| EAN | 7317761969389 |
| NOBB nr | 60760993 |
| Depth | 90 |
| Width | 60 |
| Height | 60 |
| Weight | 0.127 |
| Volume | 0.324 |
-
ESSVE Angle brackets are designed to use when anchoring crossing frameworks and brackets for framing and between wooden posts as well as ground and wall plates.
-
Made of 2.0, 2.5 or 3.0 mm hot dip galvanized sheet steel. The angle brackets are equipped with 5.0 mm holes and larger bolt holes. The angle brackets are available in two designs, with (m) or without (u) reinforcement.
-
The angle brackets are installed using e.g. ESSVE Anchor nails 4.0 mm or ESSVE Wood connector screws 5.0 mm. Installation can also be carried out using 8.0 or 10 mm bolts. For cross joint use 4-8 nails/screws in the vertical leg and 4-10 in the horizontal. Minimum 1 nail in each outer corner. Always use 2 brackets per joint.
Technical Specification
| Application environment | Outdoors |
| Approvals | CE,ETA |
| Depth | 60 |
| Corrosion resistance class | C2 |
| Diameter bolt hole | 11 |
| Diameter screw-/nailhole | 5 |
| Height | 90 |
| Material to install in | Wood |
| Number of bolt holes | 3 |
| Number of nail holes | 12 |
| Reinforced | Yes |
| Surface treatment | Hot Dip Galvanized |
| Thickness | 2 |
| Width | 60 |
| Approval |
|---|
| ETA-230185 - ESSVE Angle Brackets (EN) |
| ETA-230234 - ESSVE Angle Brackets (EN) |
| ETA-230236 - ESSVE Angle Brackets (EN) |
| Certificate |
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| DOP-230185_Angle Brackets (EN) |
| DOP-230234_Angle Brackets (EN) |
| DOP-230236_Angle Brackets (EN) |
| Product Data Sheet |
| Product data sheet |