RIDGE TIE LEFT/RIGHT, HOT DIP GALVANIZED

ESSVE Ridge tie is designed for use on roof ridge structures and for installing cross-laid framework.
Normally used as right and left-hand ties at the same time for a strong anchoring of ridges.

Made of 1.5 or 2.0 mm hot dip galvanized sheet steel and fitted with 5 mm holes. Ridge tie available as Universal or in
right and left-hand designs.

The connectors are installed with e.g. ESSVE Anchor nails 4.0 mm or ESSVE Wood connector screws 5.0 mm. Must be fitted with
2 connectors per cross-joint, diagonally/symmetrically towards each other.

Technical Specification

Approvals CE,ETA
Corrosion resistance class C2
Material to install in Wood
Surface treatment Hot Dip Galvanized

Variants

Item no. Description Package Content
62735
PC 1 PC at 650 PCS
CAR 6 PC at 650 PCS

Symbol after date = explanation as follows below

# - Partially reserved

¤ - Fully reserved

By clicking 'Accept All' you consent that we may collect information about you for various purposes, including: Statistics and Marketing